CORREAS PASO METRICO AT10-1080 A. 32
Artículo
32AT101080
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 108 |
Desarrollo (mm): | 1.080 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
DISCOS SIMPLES 1"3/4X1"1/4 Z=008
Artículo
CS15008
CORREAS TRAP. DENTADAS 3VX 280
Artículo
3VX280
POLEAS TRAP. CASQ.CONICOS SPC300-08
Artículo
CT03008
CREM. MONTAJE CONTINUO M.8 80X80X2000
Artículo
CR39200