CORREAS PASO METRICO AT10-1010 A. 50
Artículo
50AT101010
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 50 |
Dientes: | 101 |
Desarrollo (mm): | 1.010 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
REDUCTOR TSF: VP 110 P R50 90B5 B3
Artículo
VP11050P09
CORREAS DENTADAS HTD 129 3M 15 Z=43
Artículo
1293M15
DISCOS SIMPLES 5X2,5 Z=017
Artículo
CS01017
REDUCTOR TSF: VP 075 P R25 100/112B5 B3
Artículo
VP07525P11