CORREAS PASO METRICO AT10-1010 A. 32
Artículo
32AT101010
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico |
Ancho (mm): | 32 |
Dientes: | 101 |
Desarrollo (mm): | 1.010 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS T5-27 Z=012
Artículo
27T5012
POLEAS TRAP. CASQ.CONICOS SPA 71-03
Artículo
AT00713
RUEDA EN FUND. DOBLE P.CASQ.CON. 3/4X7/16 Z=057
Artículo
GD11057
DISCOS P. TRANSP. Y ELEV. P.50 R.31 Z=012
Artículo
CE19012