CORREAS P. METR.DOB.DENT DT10-1240 A. 25
Artículo
25DT101240
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada paso metrico (dentadura doble) |
Ancho (mm): | 25 |
Dientes: | 124 |
Desarrollo (mm): | 1.240 |
Material: | poliuretano |
Peso Neto (Kg): | N.D. |
CASQUILLOS FIJ. DB 40/65
Artículo
KLDB040
POLEAS TRAP. CASQ.CONICOS SPA150-04
Artículo
AT01504
CASQUILLOS FIJ. AB 75/115
Artículo
KLAB075
CORREAS DENTADAS HTD 2450 14M 40 Z=175
Artículo
245014M40