CORREAS MULTIBAND SPC 8500 RIB 2
Artículo
MBSPC85002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 8.500 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CASQ.CONICOS SPC630-08
Artículo
CT06308
POLEAS DENTADAS HTD 3M-06 Z=018
Artículo
03M0618
CORREAS MULTIBAND SPC 7100 RIB 2
Artículo
MBSPC71002
CORREAS CON DOBLE DENT. 1250 H 100 DES.3175 Z=250
Artículo
DD1250H100