CORREAS MULTIBAND SPC 8000 RIB 5
Artículo
MBSPC80005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 5 |
Tipo: | Multiband |
Desarrollo (mm): | 8.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CASQUILLOS CONICOS 2012 TAL. MM. 48
Artículo
2012048
CORREAS DENT.DOBLE DENTADO HTD 2800 8M 85 Z=350
Artículo
DD28008M85
CORREAS TRAP. ESTRECHAS SPC 2360 DES. 2390
Artículo
SPC2360
CORREAS P. METR.DOB.DENT DT10-700 A. 50
Artículo
50DT10700