CORREAS MULTIBAND SPC 8000 RIB 5
Artículo
MBSPC80005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 5 |
Tipo: | Multiband |
Desarrollo (mm): | 8.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 180 3M 15 Z=60
Artículo
1803M15
CORREAS ACANALADAS 1118 J PULG. 44 NERV. 20
Artículo
1118J20
PINONES SIMPLES 1"X17,02 Z=020
Artículo
12SD520