CORREAS MULTIBAND SPC 6000 RIB 4
Artículo
MBSPC60004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 6.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
RUEDA EN FUND. DOBLE P.CASQ.CON. 1"X17,02 Z=045
Artículo
GD12045
POLEAS TRAP. CASQ.CONICOS SPA630-01
Artículo
AT06301
PINONES SIMPLES 3/8X7/32 Z=010
Artículo
05SA210
DISCOS DOBLES 1"1/2X1" Z=034
Artículo
CD14034