CORREAS MULTIBAND SPC 6000 RIB 2
Artículo
MBSPC60002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 6.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS CON DOBLE DENT. 510 H 075 DES.1295,4 Z=102
Artículo
DD510H075
POLEAS DENT. CASQ. CON. POLYCHAIN GT 8M-21 Z=48
Artículo
0821048
CORREAS DENTADAS 1540 XH 200 DES. 3911,6 Z=176
Artículo
1540XH200
REDUCTOR TSF: VP 050 P R25 80B14 U B
Artículo
VP05025B08