CORREAS MULTIBAND SPC 5600 RIB 4
Artículo
MBSPC56004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 5.600 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS 390 L 075 DES. 990,6 Z=104
Artículo
390L075
REDUCTOR TSF: VP 040 P R5 71B14 U
Artículo
VP04005P06
POLEAS DENT. CASQ. CON. POLYCHAIN GT 8M-36 Z=28
Artículo
0836028
RUEDA CILIN. SIN CUBO MOD. 2,5 Z=085
Artículo
CM29085