CORREAS MULTIBAND SPC 5000 RIB 8
Artículo
MBSPC50008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 5.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CASQ.CONICOS SPB630-10
Artículo
BT0630X
POLEAS DENTADAS H150 Z=022
Artículo
H150022
BARRAS DENTADAS SERIE HTD 3M Z=031 LU=175
Artículo
B03M031
POLEAS TRAP. CASQ.CONICOS SPA224-06
Artículo
AT02246