CORREAS MULTIBAND SPC 4750 RIB 6
Artículo
MBSPC47506
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 4.750 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS HTD 8M-85 Z=168
Artículo
08M8516
DISCOS SIMPLES 1"1/2X1" Z=016
Artículo
CS14016
POLEAS DENTADAS HTD 3M-09 Z=036
Artículo
03M0936
MANGUITOS DENTADOS 800XXH Z 64
Artículo
MA800XXH