CORREAS MULTIBAND SPC 4250 RIB 4
Artículo
MBSPC42504
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
DISCOS DOBLES 1"X17,02 Z=085
Artículo
CD12085
CORREAS DENTADAS 488 MXL 019 DES. 123,952 Z=61
Artículo
488MXL019
POLEAS DENT. P. CASQ.CON. HTD 14M-55 Z=044
Artículo
1455044
POLEAS DENTADAS H300 Z=052
Artículo
H300052