CORREAS MULTIBAND SPC 10000 RIB 6
Artículo
MBSPC100006
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 6 |
Tipo: | Multiband |
Desarrollo (mm): | 10.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CASQUILLOS FIJ. FC 14/25
Artículo
KLFC014
PINONES SIMPLES 3/4X7/16 Z=025
Artículo
PS11025
PINONES SIMPLES 3/8X7/32 Z=018
Artículo
05SB218