CORREAS MULTIBAND SPB 7100 RIB 5
Artículo
MBSPB71005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 5 |
Tipo: | Multiband |
Desarrollo (mm): | 7.100 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS TRAP. DENTADAS AX 60 DES. 1525
Artículo
AX60
PINONES SIMPLES 1/2X3/16 Z=038
Artículo
PS07038
CORREAS TRAP. DENTADAS XPB 2120
Artículo
XPB2120
PINONES SIMPLES 1/2X5/16 Z=024
Artículo
09SC224