CORREAS MULTIBAND SPB 7100 RIB 4
Artículo
MBSPB71004
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 7.100 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENT. P. CASQ.CON. H300 Z=030
Artículo
TH30030
PINONES SIMPLES 5/8X3/8 Z=021
Artículo
10SC821
POLEAS DENTADAS HTD 5M-09 Z=024
Artículo
05M0924
CORREAS TRAP. DENTADAS XPZ 2500 -
Artículo
XPZ2500