CORREAS MULTIBAND SPB 6000 RIB 7
Artículo
MBSPB60007
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 6.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS TRAP. CUBO PLENO SPA 450-2
Artículo
AM04502
PINONES CASQ.CONIC.SIMPLES 1"1/4X3/4 Z=018
Artículo
TS13018
PARES CONICOS M. 4-B Z=26/26
Artículo
C31B261