CORREAS MULTIBAND SPB 5600 RIB 5
Artículo
MBSPB56005
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 5 |
Tipo: | Multiband |
Desarrollo (mm): | 5.600 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CASQUILLOS FIJ. FF 14/25
Artículo
KLFF014
PINONES CASQ.CONIC.SIMPLES 5/8X3/8 Z=076
Artículo
TS10076
PINONES CASQ.CONIC.DOBLES 5/8X3/8 Z=022
Artículo
TD10022
POLEAS DENTADAS MXL 025 Z=016
Artículo
MXL2516