CORREAS MULTIBAND SPB 5600 RIB 3
Artículo
MBSPB56003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 5.600 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
BARRAS DENTADAS SERIE ST-10 Z=021 LU=160
Artículo
BST1021
DISCOS SIMPLES 1/2X1/4X7,75 Z 15
Artículo
CS08015
BARRAS DENTADAS SERIE HTD 3M Z=016 LU=125
Artículo
B03M016