CORREAS MULTIBAND SPB 4750 RIB 7
Artículo
MBSPB47507
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 4.750 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
DISCOS TRIPLES 1"1/2X1" Z=015
Artículo
CT14015
CORREAS DENTADAS 150 L 050 DES. 381 Z=40
Artículo
150L050
CORREAS PARA VAR. DE VELOC. 17X6 DES. 1100
Artículo
1100VR17X6
CORREAS DENTADAS 1100 H 075 DES. 2794 Z=220
Artículo
1100H075