CORREAS MULTIBAND SPB 4370 RIB 4
Artículo
MBSPB43704
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 4.370 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
REDUCTOR TSF: VTS 044 P R20 F14 U
Artículo
VTS04420F14
GUIAS POR CORREA DENTADA FC - T10/AT10 16 mm C5
Artículo
SFC51603URG
PINONES DOBLES ASA 120 Z=014
Artículo
PD14A14
MANGUITOS PASO METRICO T5-270 W. 300
Artículo
MT5270