CORREAS MULTIBAND SPB 4370 RIB 2
Artículo
MBSPB43702
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (mm): | 4.370 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES TEMPLADOS 1"X17,02 Z=035
Artículo
PS12T35
PINONES DOBLES 8X3 Z=027
Artículo
PD04027
PINONES DOBLES 8X3 Z=026
Artículo
PD04026
ELEMENTO ELASTICO NEGRO 55/70
Artículo
EN55070