CORREAS MULTIBAND SPB 4250 RIB 3
Artículo
MBSPB42503
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
RUEDA EN FUNDICION DOBLE 1"X17,02 Z=076
Artículo
RD12076
CORREAS PASO METRICO T2.5-880 A. 06
Artículo
06T25880
PINONES DOBLES TEMPLADOS 1"X17,02 Z=019
Artículo
PD12T19
CORREAS DENTADAS 110 XL 025 DES. 279,4 Z=55
Artículo
110XL025