CORREAS MULTIBAND SPB 4250 RIB 3
Artículo
MBSPB42503
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 4.250 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 117 3M 15 Z=39
Artículo
1173M15
RUEDA CILINDRICA CON CUBO MOD. 1 Z=015
Artículo
PM26015
POLEAS DENT. P. CASQ.CON. HTD 5M-15 Z=064
Artículo
0515064
CORREAS DENTADAS 100 XL 025 DES. 254 Z=50
Artículo
100XL025