CORREAS MULTIBAND SPB 3550 RIB 8
Artículo
MBSPB35508
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 3.550 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS 1224 MXL 019 DES. 310,896 Z=153
Artículo
1224MXL019
CREM. MONTAJE CONTINUO M.2 20X20X1000
Artículo
CR28100
REDUCTOR TSF: VES 030 P R60 U
Artículo
VES03060S01
POLEAS DENTADAS H100 Z=060
Artículo
H100060