CORREAS MULTIBAND SPB 3550 RIB 7
Artículo
MBSPB35507
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 7 |
Tipo: | Multiband |
Desarrollo (mm): | 3.550 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
POLEAS DENTADAS MXL 025 Z=024
Artículo
MXL2524
CORREAS DENTADAS HTD 2450 14M 55 Z=175
Artículo
245014M55
PARES CONICOS M. 2,5-B Z=16/16
Artículo
C29B161
POLEAS DENTADAS HTD 3M-06 Z=012
Artículo
03M0612