CORREAS MULTIBAND SPB 3550 RIB 4
Artículo
MBSPB35504
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 3.550 |
Material: | Goma |
Peso Neto (Kg): | 3,8 |
POLEAS DENT. P. CASQ.CON. HTD 14M-40 Z=044
Artículo
1440044
CORREAS DENTADAS HTD 560 8M 30 Z=70
Artículo
5608M30
CASQUILLOS FIJ. GG 300/375
Artículo
KLGG300