CORREAS MULTIBAND SPB 3000 RIB 3
Artículo
MBSPB30003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 3.000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 501 3M 03 Z=167
Artículo
5013M03
PINONES SIMPLES TEMPLADOS 1"1/4X3/4 Z=040
Artículo
PS13T40
DISCOS SIMPLES 8X3 Z=019
Artículo
CS04019
CASQUILLOS FIJ. EE 40/75
Artículo
KLEE040