CORREAS MULTIBAND SPB 2800 RIB 8
Artículo
MBSPB28008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 2.800 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
DISCOS SIMPLES 5X2,5 Z=036
Artículo
CS01036
RUEDA CILINDRICA CON CUBO MOD. 4 Z=012
Artículo
PM31012
REDUCTOR TSF: VTS 044 P R100 F11 U
Artículo
VTS044X1F11
POLEAS DENT. P. CASQ.CON. L075 Z=032
Artículo
TL75032