CORREAS MULTIBAND SPB 2580 RIB 4
Artículo
MBSPB25804
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 2.580 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES CASQ.CONIC.TRIPLES 3/8X7/32 Z=025
Artículo
TT05025
POLEAS TRAP. CASQ.CONICOS SPA132-06
Artículo
AT01326
PINONES EN ACERO INOX 5/8X3/8 Z=015
Artículo
PS10X15
POLEAS DENT. P. CASQ.CON. L075 Z=048
Artículo
TL75048