CORREAS MULTIBAND SPB 2500 RIB 8
Artículo
MBSPB25008
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 8 |
Tipo: | Multiband |
Desarrollo (mm): | 2.500 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
BARRAS DENTADAS SERIE HTD 3M Z=020 LU=150
Artículo
B03M020
CORREAS DENTADAS 800 MXL 012 DES. 203,2 Z=100
Artículo
800MXL012
RUEDA CILINDRICA CON CUBO MOD. 2 Z=046
Artículo
PM28046