CORREAS MULTIBAND SPB 2500 RIB 3
Artículo
MBSPB25003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (mm): | 2.500 |
Material: | Goma |
Peso Neto (Kg): | 4 |
PINONES CASQ.CONIC.DOBLES 3/8X7/32 Z=020
Artículo
TD05020
DISCOS SIMPLES 1/2X1/4X7,75 Z 18
Artículo
CS08018
PINONES SIMPLES 1/2X5/16 Z=011
Artículo
09SA611
POLEAS DENT. P. CASQ.CON. HTD 14M-55 Z=044
Artículo
1455044