CORREAS MULTIBAND SPB 2240 RIB 4
Artículo
MBSPB22404
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (mm): | 2.240 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PIÑON TENS. DOBLE ZK 20-1D 3/8""x7/32"" Z15 M10
Artículo
RE011727
PINONES SIMPLES 3/4X7/16 Z=020
Artículo
11SE020
CORREAS DENTADAS HTD 141 3M 12 Z=47
Artículo
1413M12