CORREAS MULTIBAND D 225 RIB 3
Artículo
MBD2253
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 225 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES 3/8X7/32 Z=020
Artículo
05SB220
CREM. MONTAJE CONTINUO M.3 30X30X2000
Artículo
CR30200
MANGUITOS PASO METRICO T2.5-500 W.130
Artículo
MT25500
CASQUILLOS FIJ. RR 50/80
Artículo
KLRR050