CORREAS MULTIBAND B 94 RIB 2
Artículo
MBB942
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 94 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
RUEDA EN FUND. TRIPLE P.CASQ.CON. 3/4X7/16 Z=045
Artículo
GT11045
CORREAS PASO METRICO AT5-375 A. 20
Artículo
20AT5375