CORREAS MULTIBAND B 120 RIB 4
Artículo
MBB1204
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 4 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 120 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 4578 14M 115 Z=327
Artículo
457814M115
PINONES TENSORES 1/2X5/16 Z=020
Artículo
PC09020
SEMIACOPLAMIENTO CASQUILLO CONICO E 2012 55/70
Artículo
GTE5570
CORREAS TRAPECIALES DOBLES BB 138
Artículo
BB138