CORREAS MULTIBAND A 64 RIB 2
Artículo
MBA642
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 64 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES DOBLES 3/4X7/16 Z=043
Artículo
PD11043
POLEAS TRAP. CASQ.CONICOS SPB140-01
Artículo
BT01401
CASQUILLOS FIJ. AA 110/155
Artículo
KLAA110
MANGUITOS CON DOBLE DENT. 5740-14M Z 410
Artículo
MD574014M