CORREAS MULTIBAND 8V 3000 RIB 2
Artículo
MB8V30002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 3000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 450 5M 09 Z=90
Artículo
4505M09
CORREAS TRAP. ESTRECHAS SPA 3550 DES. 3568
Artículo
SPA3550
CORREAS DENTADAS HTD 669 3M 09 Z=223
Artículo
6693M09
POLEAS DENTADAS T5-21 Z=019
Artículo
21T5019