CORREAS MULTIBAND 8V 2800 RIB 2
Artículo
MB8V28002
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 2 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 2800 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS HTD 564 3M 12 Z=188
Artículo
5643M12
CORREAS TRAP. DENTADAS XPA 1557 - 1575
Artículo
XPA1557
CORREAS CON DOBLE DENT. 450 L 050 DES.1143 Z=120
Artículo
DD450L050
POLEAS TRAP. CASQ.CONICOS SPB150-05
Artículo
BT01505