CORREAS MULTIBAND 5V 630 RIB 3
Artículo
MB5V6303
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 630 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS 1000 H 100 DES. 2540 Z=200
Artículo
1000H100
DISCOS SIMPLES 5/8X3/8 Z=012
Artículo
CS10012
CORREAS DENTADAS HTD 1050 5M 25 Z=210
Artículo
10505M25
PIÑON TENS. DOBLE ZK 50-5D 1""x17,02mm Z13 M20
Artículo
RE011743