CORREAS MULTIBAND 5V 2500 RIB 3
Artículo
MB5V25003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 2500 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS DENTADAS 160 XL 037 DES. 406,4 Z=80
Artículo
160XL037
POLEAS TRAP. CASQ.CONICOS SPZ224-05
Artículo
ZT02245
POLEAS DENTADAS H300 Z=020
Artículo
H300020
CASQUILLOS CONICOS 2517 TAL. 1"1/4
Artículo
2510114