CORREAS MULTIBAND 3V 1000 RIB 3
Artículo
MB3V10003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 1000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
CORREAS CON DOBLE DENT. 750 H 150 DES.1905 Z=150
Artículo
DD750H150
POLEAS DENTADAS XL037 (AL) Z=042
Artículo
XA37042
INSERTO UC 202 CARGA NORMAL
Artículo
UC202
CORREAS MULTIBAND SPC 5600 RIB 4
Artículo
MBSPC56004