CORREAS MULTIBAND 3V 1000 RIB 3
Artículo
MB3V10003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 1000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES 3/8X7/32 Z=014
Artículo
05SA514
CORREAS PASO METRICO T5-1275 A. 10
Artículo
10T51275
PINONES SIMPLES 1/2X5/16 Z=021
Artículo
09SB821
CORREAS DENT. EN METROS T10 A. 12
Artículo
CMT1012