CORREAS MULTIBAND 3V 1000 RIB 3
Artículo
MB3V10003
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Descripción
Starting from single belts, and join them with a tough tie band that, when cured, welds the belt together permanently. This tie band assures lateral rigidity, and guides the belts into the sheave grooves in a straightline, so the belts can’t flip over or jump off, even under severe shock loads.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
Multiband V-belt are ideal on vertical shaft drives, and when an outside idler is used.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Número Bandas: | 3 |
Tipo: | Multiband |
Desarrollo (pulgadas): | 1000 |
Material: | Goma |
Peso Neto (Kg): | N.D. |
PINONES SIMPLES 1"1/4X3/4 Z=013
Artículo
13SD013
CORREAS DENTADAS 1100 H 100 DES. 2794 Z=220
Artículo
1100H100
PINONES CASQ.CONIC.TRIPLES 3/8X7/32 Z=023
Artículo
TT05023
CORREAS DENTADAS HTD 129 3M 12 Z=43
Artículo
1293M12