CORREAS DENTADAS 630 H 150 DES. 1600,2 Z=126
Artículo
630H150
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 630 |
Ancho (pulgadas): | 150 |
Dientes: | 126 |
Desarrollo (mm): | 1.600,2 |
Material: | Goma |
Peso Neto (Kg): | 0,264 |
DISCOS SIMPLES 6X2,8 Z=035
Artículo
CS02035
POLEAS TRAP. POLY-V CASQ. CONICOS PL 90-8
Artículo
LT0908
MOTOR ELÉCTR. IE3 80B 2P 1,10KW 230/400V B5
Artículo
M30801102B5
MOTOR ELÉCTR. IE1 315LB 2P 200KW 400/690V B35
Artículo
C13152002B35