CORREAS DENTADAS 420 H 300 DES. 1066,8 Z=84
Artículo
420H300
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 420 |
Ancho (pulgadas): | 300 |
Dientes: | 84 |
Desarrollo (mm): | 1.066,8 |
Material: | Goma |
Peso Neto (Kg): | 0,352 |
PINONES SIMPLES 8X3 Z=026
Artículo
PS04026
CORREAS DENTADAS 960 MXL 025 DES. 243,84 Z=120
Artículo
960MXL025
POLEAS DENTADAS L050 Z=019
Artículo
L050019
POLEAS DENTADAS POLYCHAIN GT 8M-21 Z=22
Artículo
08M21022