CORREAS DENTADAS 255 H 300 DES. 647,7 Z=51
Artículo
255H300
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 255 |
Ancho (pulgadas): | 300 |
Dientes: | 51 |
Desarrollo (mm): | 647,7 |
Material: | Goma |
Peso Neto (Kg): | 0,2137 |
POLEAS DENTADAS HTD 5M-09 Z=018
Artículo
05M0918
PINONES TRIPLES ASA 80 Z=016
Artículo
PT12A16
LAMINAS TENSORAS 5M 10
Artículo
PB5M10
DISCOS SIMPLES ASA 40 Z=048
Artículo
CS09A48