CORREAS DENTADAS 160 XL 037 DES. 406,4 Z=80
Artículo
160XL037
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of material with high breaking load. The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line. NB: the photo on the
Descripción
The resistive insert is the element constituting the core of the belt. It fully bears the loads and.consists of a cord of
material with high breaking load.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
The insert is wound spiral fashion the full lenght of the belt and its position determines the belt’s pitch line.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Especificaciones
Tipo: | Correa dentada pulgada |
Desarrollo (pulgadas): | 160 |
Ancho (pulgadas): | 037 |
Dientes: | 80 |
Desarrollo (mm): | 406,4 |
Material: | Goma |
Peso Neto (Kg): | 0,009 |
PINONES SIMPLES 3/8X7/32 Z=020
Artículo
05SB220
POLEAS TRAP. CASQ.CONICOS SPA 71-02
Artículo
AT00712
PINONES SIMPLES 3/8X7/32 Z=013
Artículo
05SA213
POLEAS DENTADAS XL037 (AL) Z=032
Artículo
XA37032