Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 5M-25 Z=012
Item No.
05M2512
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 25 |
| Fastening Type: | Centre Tip |
| Number of teeth: | 12 |
| Flange: | Yes |
| Material: | Blacksteel |
| Net Weight (Kg): | 0.05 |
WORM GEARBOX: VTS 044 P R14 F14 U
Item No.
VTS04414F14
CLAMPING PLATES ST5-10
Item No.
PBST510
CLASSIC V-BELTS A 44 DEV. 1132 1/2
Item No.
1132A44
VARIATOR BELTS 47X12 DEV. 1270
Item No.
1270VR47X12
