Deutsch
Español
Français
Italiano
TIMING BELT PULLEYS HTD 3M-09 Z=072
Item No.
03M0972
The materials used depend on the dimension and type of pulleys and are showed in the following list: Cast iron EN-GJL-250 UNI EN 1561 Steel C45 E UNI EN 10083-1 Aluminium 6082 T6 UNI 9006/4 These items are supplied with a small prebore so that they can be machined according to customers’
Description
The materials used depend on the dimension and type of pulleys and are showed in the following list:
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
Cast iron EN-GJL-250 UNI EN 1561
Steel C45 E UNI EN 10083-1
Aluminium 6082 T6 UNI 9006/4
These items are supplied with a small prebore so that they can be machined according to customers’ requirements. Furthermore –for the most common types- also taperlock bore are available, together with timing bars.
NB: the photo on the left is indicative only and does not constitute a technical specification. For more information refer to Sati General Catalogue.
Specifications
| Belt Width (mm): | 9 |
| Fastening Type: | Pilot Bore |
| Number of teeth: | 72 |
| Flange: | No |
| Material: | Aluminium |
| Net Weight (Kg): | 0.145 |
WORM GEARBOX: VP 130 P R10 132B5 B3
Item No.
VP13010P15
SEMI-COUPLING SHORT HUB "38"
Item No.
SG0C038
HALF-COUPLING W. SMALL TAPE END HRC70 1008
Item No.
HRCI070
TIMING B. PULLEYS TAPER B. HTD 5M-15 Z=072
Item No.
0515072
